+48 532 626 248
Scope of cooperation
Goal of the project
Increasing the effectiveness
of the production process
How was it before?
The data set did not show the trend of changes in measurements in time.
Installation of the door for household appliances depends on precisely gluing together the glass and two columns. The quality control of this component is based primarily on measuring dimensions with high accuracy.
It is carried out by precisely measuring the distance between six specified points. The measured data must be within the defined tolerance range to assess whether the door meets the quality standard. Every day, dozens of measurements of various types of doors for household appliances are made.
At the end of each, we received a report containing a set of six measurement results for specific components. It was important for us to respond quickly and eliminate the causes of recurring errors in assembly.
Technologies used in the project
Cooperation with RST Software Masters
From the very beginning, we found a “common language” when talking about the project, which was the proof of mutual understanding of the subject.
Technology and architecture selected by experts
The RST development team selected technology and architecture in such a way, so that the implemented system for the visualization of door measurements would meet the requirements in terms of functionality and integration. We had an idea that we wanted to translate into an IT solution.
Based on our idea, the RST Software Masters team has developed the implementation concept with the mockup that was to visualize the views of the future application. We quickly started to work together on the concept. What helped there was the use of mockups and our direct contact with the development team.
Together, we chose the infrastructure for the designed system. We decided on 55-inch monitors. The measurement trends are displayed on them in high resolution.
Thanks to the implementation of the door measurement visualization system, we follow the trend of the production quality of individual components in a constant manner. Monitoring the quality trend allows us to respond much faster to remove the causes of incorrect assembly. By minimizing the scale of produced components that do not meet the quality criteria, we increase the final efficiency of the production process.
Quality Manager at Electrolux Poland Sp. z o.o.
The trend of the assembly quality visualised on an
ongoing basis enables quick response
Three months after the implementation of the system,
there were noticeable effects in the form of reduced scale
of manufactured doors that did not meet the quality control criteria.
When the chart shows that
we start corrective actions.
The system works steadily, providing the assembly operators
with up-to-date information on the quality of their work.
The value added in relation
to the previous solution
is the possibility to report
the measurement results history.
WE ARE THE MEMBER OF:
WE ARE THE PART OF:
WE ARE THE OFFICIAL PARTNER OF: